Hey, no offense, but your Swim Spa Cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at one time or another; water is one of nature’s most erosive substances. Moisture permeates in and ends up being trapped in between the outer vinyl shell and the cling wrap foam cores. The warm, damp environment is best for mold and mildew and other forms of stinky stuff.
If wetness has actually permeated further into the plastic wrapped foam core, the cover becomes waterlogged, which can rapidly grow all sorts of dark and stinky slime, but also make the cover actually difficult to remove, and not as efficient at keeping the heat in the spa. Time for a much better type of Swim Spa Cover
Stinky Swim Spa Cover?!?
• Broken or damaged. Broken foam cores, ripped or worn spots, torn seams. A Swim Spa Cover that loses it’s arched roof line, to keep water draining pipes off correctly, will ultimately begin to puddle water, which is most likely time to purchase a brand-new Swim Spa Cover! A Swim Spa Cover with threadbare areas in the vinyl is also problem, and although you can fend off the unavoidable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Remove your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can withstand longer durations, but it’s a great habit to remove the cover and let it get some air on a weekly basis. If you can quickly open the zipper to allow wetness to leave do so, however don’t eliminate fragile foam panels unless absolutely necessary.
Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s easy to make a Swim Spa Cover with tape and staples, but it will not stop moisture extremely well. Even the very best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat bonded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only real option is a Swim Spa Cover utilizes air to insulate instead of foam.
• Bad Spa Water. If the spa water is not maintained regularly with sanitizer and filtering, or is not shocked frequently enough, bacteria and algae can make the most of a hospitable environment to flourish. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your Swim Spa Cover cover. Because the cover is so close to the spa, it soaks up the chemistry of the spa. Tidy, clear and hygienic water is the very best environment to prevent stinky spa covers. (Sorry however this is just BS) The fact is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Lightweight Swim Spa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing system, that can be worse than no roof at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times annually, so that it always looks terrific, and is protected from the elements. Again, this truly isn’t going to stop the mold and mildew from growing inside a foam cover But it will assist your spa dealership pay their costs. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.
Repair Your Swim Spa Cover!
• Remove to Safe Location: This initial step might seem obvious, however you need a good location to enable the cover to sit undisturbed from family pets, wild animals, and winds. It should be a bright area if possible, or a dry indoor area with low humidity can also be used.
• Deodorize & Disinfect: You may not need to do both, it’s finest to be as gentle as possible. Do not use household cleaning products on your Swim Spa Cover, odd chemicals can wind up in your spa water. Gently clean all outside surface areas with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this need to be prevented if possible, since the panels might become harmed during removal or cleaning. But if you identify that there is something slimy within, you can generally unzip and get rid of the panel for a cleansing inside and out.
How often does your spa dealership anticipate you to do all this? If your swim spa is safeguarded from a lot of sun and rain, twice annually. If it’s visible it ought to be 3-4 times annually. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster.
The easiest remedy for a smelly Swim Spa Cover is to just purchase a various sort of Swim Spa Cover A foul-smelling swim spa cover merely suggests that your cover is taking on wetness, and things are starting to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam but has actually sealed air chambers instead will avoid offering the mold and mildew a location to grow in the first place.